Siemens SITRANS FUS1010 NEMA-4X/ IP 65 1010WX CLAMP-ON Liquid Flowmeters, 1010WX Flowmeter Label

Section 1 1010NFM-3J

1.91010WX CLAMP-ON LIQUID FLOWMETERS

The 1010WX flowmeter model numbers are listed below.

1010WX Series Flowmeters

1010WX

1010DWX

1010MWX

1010WX METER TYPES

The 1010WX series flowmeters are available in Single, Dual Path and Multi-Path versions. The flowmeters may include a display providing flow rate, diagnostics data and keypad interface to access on-screen software setup menus. Safety agency approved 1010WX series flowmeters have hazardous area certification as indicated in the label example below.

NOTE: Graphic displays and local keypads are only available as options. The standard 1010WX is not equipped with a graphic display or local keypad. Refer to Appendix B in this field manual for hardware and software requirements for programming these models.

1010WX FLOWMETER LABEL

Blank unless flowmeter is rated suit- able for hydrogen atmosphere. See “System Hardware” description be- low.

CLASS 1, ZONE 1, AEx d [ia] IIB +H2	T5	APPROVED
EXPLOSION PROOF WITH I. S. OUTPUTS FOR CL I, GROUPS	B C, D, CL II, GROUPS E, F, G

INSTALL PER CONTROLOTRON DRAWING 1010-443

CL I, DIV 2, GROUPS A, B, C, D SUITABLE FOR CL II, DIV 2, GROUPS E, F, G

ENCL. TYPE 4X IP66RATING: 250 VAC OR 36 VDC MAX. 25 W

CAUTION-DISCONNECT FROM SUPPLY BEFORE OPENING. KEEP COVER TIGHT WHILE

CIRCUITS ARE ALIVE. CONDUIT SEALS MUST BE INSTALLED WITHIN 18" OF THE ENCLOSURE

Exia

Associated

Apparatus

SYSTEM HARDWARE

ENCLOSURE:

The System 1010WX Series flowmeters have two available case configurations:

Standard 1010WX Case

The System 1010NWX Series flowmeter housed in a cast aluminum enclosure suitable for gas groups up to and including hydrogen (Class 1, Zone 1, AEx d [ia] IIB +H2 T5).

Alternate Light Weight 1010WX Case

The System 1010WX Series flowmeter housed in a lightweight cast aluminum case suitable for gas groups up to and including propane (Class 1, Zone 1, AEx d [ia] IIB T5).

1-19