Siemens SITRANS FUS1010 NEMA-4X/ IP 65 manual NFM-3J Selecting Items from an Option List

Section 1 1010NFM-3J

Selecting Items from an Option List

Examine the screen below. It shows how to use an option list to select a liquid for your application. How to access this menu will be explained later. Note that the menu name [Application Data] appears highlighted on lower left of the screen. Note also that the menu cell [Liquid Class] is highlighted - the right-hand column shows the answer [Water 20C/68F].

Siemens		2 Channel [1]		Channel 1
Select Liquid Class from Liquid Table
	Liquid Class		Water 20C/68F
	Temperature Range		-40F to 250F
	Pipe Configuration		Fully Developed
	Anomaly Diams		10

Application Data

Pressing the <Right Arrow> changes the left-hand column to [Select Liquid]. Pressing the <Right Ar- row> again accesses the option list. This expands the highlighted area to show the list contents. Note that a cursor (arrow) points to the top item on the list.

Siemens	2 Channel [1]		Channel 1
Access Liquid Option List
Select Liquid		>Water 20C/68F
Estimated Vs m/s		Water	50C/122F
Viscosity cS		Water 75C/167F
Density SG	ens	Water	100C/212F
		Water	125C/257F
		Water	150C/302F
		Water	175C/347F
		Water	200C/392F
		Water	225C/437F
		Water	250C/482F
		Acetic Acid

Liquid Class

The <Up and Down Arrows> scroll the option lists. Every press moves the cursor to the next item in sequence. Due to the size of display screen, some option lists include more items than the display can show. For example, on the screen above the last option shown is [Acetic Acid]. However, this option list has more listings. Continue to press the <Down Arrow> to see more liquid selections. When you arrive at the last item on a list, the next <Down Arrow> press brings you back to the top of the list; because the option lists are of the “wrap-around” type.

To select an option list item, move the cursor to the item and then press the <ENT> key.This places your selection at the top of the list and moves you out of the option list to the next menu cell. Examine screen on next page. The option list item: [Diesel Fuel] has been selected. Note that this appears on the right-hand column and that the highlighted area moves to the next menu cell in sequence: [Esti- mated Vs m/s].

1-6