Siemens SITRANS FUS1010 NEMA-4X/ IP 65 manual Channel Setup Menu, HOW to Recall a Site Setup

Section 2 1010NFM-3J

2.1THE CHANNEL SETUP MENU

Available after picking a meter type and a measurement technology. Use this menu to manage site setups. You can create, recall, delete and save entire site setups. You can apply Site Security, which permits read-only access to the Installation Menu unless you enter a password. The Channel Enable switch allows you to disable and enable a measurement channel. *Be aware that Site Name option lists only show sites that are consistent with the currently selected meter type.

CHANNEL SETUP MENU STRUCTURE

Channel Setup

Recall Site Setup	*Site Name List
Channel Enable	Yes
	No
Create/Name Site	*Site Name Entry/Edit
Site Security	Off
	On
Delete Site Setup	Site Name List
Save/Rename Site	*Site Name Entry/Edit

This shows that the Meter Type is Dual Channel, operating with Channel 1 active.

This shows that the site setup [XYZ] is the active site.

Use this menu cell to create and name a site setup. Note that the cell retains the name of the most recently created site setup [XYZ].

Use this menu cell at any time to manually save the site data.

Note that attempting to leave the menu after entering/editing any site data triggers a Save Site pop-up window automatically.

Siemens	2 Channel		[1]	XYZ
Scroll saved Site Setup list and Enter
Recall Site Setup		XYZ
Channel Enable		Yes
Create/Name Site		1
Site Security		Off		Flow
Delete Site Setup		1
Save/Rename Site		1
Channel Setup

Use this menu cell to free up site storage memory by deleting obsolete site setups. Note that the cell retains the name of the most recently created site setup [XYZ].

This option list expands as you save more sites.

This cell shows that site setup [XYZ] is stored in memory, and can be recalled. This option list expands as you save more sites.

Use this menu cell to enable or disable Site Security. Provide a password to enable. Re-enter the password to disable.

2.1.1 HOW TO RECALL A SITE SETUP

The Recall Site command allows you to reinstall the system at a former site. For an original installa- tion, see Create/Name Site for instructions on how to create a new Site Setup. This menu cell provides a list of saved site names. Scrolling to a site name and pressing <ENT> moves all the parameters associated with that name into Active Memory.

If there are no site setups present in site storage memory, the menu cell reports [No Sites] in the right- hand column. Saving a site setup with a site name adds the name to this option list. The first selection

2-2