Siemens SITRANS FUS1010 NEMA-4X/ IP 65 manual Character position

Section 1 1010NFM-3J

Siemens		2 Channel	[1]	Channel 1
Right Arrow & Enter Creates a new Site
	Recall Site Setup		No Sites
	Channel Enable		No
	Create/Name Site		?„
	Site Security		Off
	Delete Site Setup		No Sites
	Save/Rename Site

Channel Setup

This block cursor is currently placed at the first character position.

Press and hold . Note that the character position begins to scroll upward through the

alphabet of capital letters. Continue to scroll until block cursor shows [S]. Press .

NOTE: The character [S] remains at the first character position and the block cursor moves to the second character position.

		Siemens	2 Channel	[1]	Channel 1
		Right Arrow & Enter Creates a new Site
		Recall Site Setup		No Sites
		Channel Enable		No
		Create/Name Site		?S„
		Site Security		Off
		Delete Site Setup		No Sites
		Save/Rename Site
		Channel Setup
Press and hold	. Notice that the capitalized alphabet list begins to scroll downward through
the alphabet from [S]. Stop scrolling at letter [I]. Press						to move the block cursor to the third
character position.

Scroll back up to letter [T]. Move the cursor to the fourth character position. Scroll down to letter

[E].Move the cursor to the fifth character position. Type [1] on the numeric keypad to complete the site name.

Siemens	2 Channel	[1]	Channel 1
Right Arrow & Enter Creates a new Site
Recall Site Setup		No Sites
Channel Enable		No
Create/Name Site		?SITE1„
Site Security		Off
Delete Site Setup		No Sites
Save/Rename Site

Channel Setup

Press ENT to create the site setup named [SITE1]. Note that the name now appears in the [Save/Rename Site] menu cell and on the upper right corner of the graphic screen.

1-13