Section 4

1010NFM-3J

 

 

To store the data press ENT . This moves the cursor to Network ID.

4.8.5 NETWORK ID

The [Network ID] menu cell stores an identification number to facilitate host computer polling when you use this system in a network environment. The Network ID number can be any value other than 0 (zero). The default setting, zero, disables the network function. Note that entering a non-zero Network ID number suspends all routine Datalogger activity regardless of any selected options.

NOTE: If you are using the flowmeter for a “stand-alone” application, you must keep the zero Network ID number.

To assign a Network ID number

To enable numeric entry press.

Use the numeric keys to type the Network ID number.

To store Network ID press ENT. This moves the cursor to RTS Key Time.

4.8.6 RTS KEY TIME

During a serial transmission session, you can select how long the flow computer holds its request-to-sendline high until it receives a clear-to-sendsignal. If the RTS time expires, the 1010 will return its RTS line low and abort the transmission attempt. Data entry units are seconds. The default RTS key time is 0.2 seconds.

NOTE: The RTS Key Time function is only provided when the meter’s network ID number is non-zero.

To set the RTS Key Time:

To access the RTS Key Time option list press

To move the asterisk to the required RTS time press

To store the data press ENT

4.9BACKLIGHT

This menu cell allows you to specify how long you want to maintain the backlighting for the LCD Graphic Display. Select [On] for continuous illumination. Press the <Right Arrow> to access the option list and then scroll to desired time delay (before turn-off).

Press ENT to store your setting.

4.10SYSTEM INFO

This menu provides general information about the flowmeter.

4-15

Page 162
Image 162
Siemens SITRANS FUS1010 NEMA-4X/ IP 65 manual Network ID, RTS KEY Time, Backlight, System Info