Section 5 | |||
|
|
|
|
|
|
| |
TERM | EXPLANATION | ||
Local Display | Refers to the 1010N’s integral display screen. | ||
Menu | |||
| functions (e.g., | ||
Menu Cell | A location within a Menu where you define either a single numeric value or | ||
| option list selection that supports the | ||
| menu cells show reference data appropriate to the current application. | ||
NEGFLOW | Totalizer mode for negative flow total only. |
| |
NETFLOW | Totalizer mode that combines positive and negative flow totals. | ||
NOTOT | System function that disables the internal Totalizer. |
| |
Number Index | Computed transducer spacing index based on the estimated sonic velocity | ||
| measurement. This Index cannot be overridden by installer. | ||
Numeric Data | Refers to a value entered into a menu cell. An example would be the pipe |
| |
| outer diameter. | ||
Numeric Entry | Refers to a number you type into menu cell that stores numeric data. |
| |
Numeric Keys | Use the Numeric keys to type a numeric value where appropriate. | ||
OpSys ROM | The read only memory that stores its basic operating instructions and per- |
| |
| manent defaults. | ||
Option List | Lists of options presented at menu cells that allow you to select either a |
| |
| single item or multiple items (depending on the function that the menu cell | ||
| controls). | ||
Parameter | Refers to value (either numeric or list selection) stored in a menu cell. | ||
POSFLOW | Totalizer mode for positive flow total only. |
| |
Register | Refers to a memory location used by the flow computer to store data such as |
| |
| the flow total, etc. | ||
RTD | Temperature sensors used with energy flow of mass flow systems. | ||
Site Name | A | ||
| retreive a particular Site by selecting its name from a site name list. | ||
Site Setup | A collection of parameters used by the meter to service a specific site (or |
| |
| location).1010 allows you to store several independent Site Setups. | ||
Site Storage Memory | Section of RAM allocated for permanent data storage. This memory seg- |
| |
| ment stores inactive site setups (including a backup of active site). The meter’s | ||
| Site Setup storage capacity depends on the dynamic memory allocation as | ||
| dictated by each application. In addition, the meter uses Site Storage Memory | ||
| to store configurable operating parameters such as pipe and liquid tables. | ||
Spacing Index | Refers to the Number Index, used by the flow computer to determine the | ||
| space between the upstream and down stream transducers on | ||
| systems. | ||
Spacing Offset | Fixed transducer offset assigned by the flow computer. This can be overrid- |
| |
| den by the installer. | ||
TOTCNT | A totalizer pulse count function used for Batching or Sampling. | ||
Transducer |
| ||
Vaer | The meter’s aeration percent output. |
| |
Vps | The sonic propagation velocity of a pipe. |
| |
Vs | The sonic velocity of a liquid. |