Table Of Contents | ||
|
|
|
| NETFLOW | |
| Totalizer Controls | |
| The Flow/Total Units Menu Structure | |
2.6.1 | Flow Volume Units | |
2.6.2 | Flow Time Units | |
2.6.3 | Flow Display Range | |
2.6.4 | Flow Display Scale | |
2.6.5 | Total Volume Units | |
2.6.6 | Totalizer Scale | |
2.6.7 | Total Resolution | |
2.6.8 | Totalizer Mode | |
2.6.9 | Batch/Sample Total | |
2.7 | The Data Span/Set/Cal Menu | |
| The Data Span/Set/Cal Menu Structure | |
2.7.1 | Span Data | |
| Max Flow | |
| Min Flow | |
| Max Vs m/s | |
| Min Vs m/s | |
| Max Vs m/s | |
| Min Vs m/s | |
| Max S.G | |
| Min S.G | |
| Max Viscosity cS | |
| Min Viscosity cS | |
| Max Temperature | |
| Min Temperature | |
2.7.2 | Set Alarm Levels | |
| High Flow | |
| Low Flow | |
| High S.G | |
| Low S.G | |
| High Viscosity cS | |
| Low Viscosity cS | |
| High Temperature | |
| Low Temperature | |
| Interface Vs (m/s) | |
| Aeration % | |
| Makeup Latch | |
2.7.3 | Calibrate Flow Rate | |
| Kc Calibration | |
| MultiPoint Calibration | |
2.8 | The StripChart Setup Menu | |
| The StripChart Setup Menu Structure | |
2.8.1 | Select Data | |
2.8.2 | Data Display | |
2.8.3 | Time Base | |
2.8.4 | StripChart Clear | |
2.9 | The Datalogger Setup Menu | |
| The Datalogger Setup Menu Structure |
iii