Section 2 | ||
|
|
|
Use this menu cell to select either volumetric or mass flow rate units.
Use this menu cell to select a time base for the flow rate units.
Use this menu cell to select a range for the flow rate display screen.
Use this menu cell to select either volumetric or mass flow total units.
Use this menu cell to set the resolution of the totalizer.
Siemens | 2 Channel [1] | FLOW1 |
Choose desired Flow rate volume units
| Flow Volume Units | Gallons <US> |
|
|
| Flow Time Units | MIN |
|
|
| Flow Display Range | Autorange |
| |
| Flow Display Scale | GAL/MIN |
| |
| Total Volume Units | Gallons <US> |
| |
| Totalizer Scale | KGAL |
| |
| Total Resolution | 00000x00 |
| |
| Totalizer Mode | NETFLOW |
| |
| Batch/Sample Total | 0.000 |
|
|
|
|
|
| |
|
|
|
|
|
Flow/Total Units |
|
|
| |
|
| Use this menu cell to enter a | ||
|
| volume accumulation for the | ||
|
| batching or sampling totalizer | ||
|
| relay trigger. | ||
Use these menu cells to set the scaling for the flow rate and flow total outputs.
Use this menu cell to select how the totalizer accumulates flow.
2.6.1 FLOW VOLUME UNITS
The [Flow Volume Units] option list allows you to select the rate units the meter uses to report volumet- ric or mass flow. If you select mass units, the meter uses the specific gravity parameter (see Applica- tion Class section) to convert volumetric flow to mass flow. The default English Units is [Gallons].
To select a Volumetric or Mass Unit:
To access the [Flow Volume Units] option list press
To move the cursor to the required units press
To store selection press
ENT 
2.6.2 FLOW TIME UNITS
The [Flow Time Units] option list allows you to select a flow display time base. The system default is [Minutes]. If this suits the application, press the <Down Arrow> to bypass this menu cell.
To select a Time Unit:
To access the [Time Unit] option list press
To move the cursor to the required time units press
To store the time units press
ENT 
