Siemens SITRANS FUS1010 NEMA-4X/ IP 65 manual Automatic Adjustment Procedure

Section 2				1010NFM-3J
	Siemens	Dual Path	4SS10G
	fx (drive)	29
	N (burst length)	5
	Ltn in	5.316
	Vf max CU
	Vs max m/s
	Vs min m/s	1355.00
	Samples/Cycle	29
	HF	>-0.120
	Site Setup Data

“Automatic” Adjustment Procedure

zIn the [Site Setup Data] Menu, press the <Down Arrow> and scroll to the [HF] menu cell. Press the <Right Arrow> and a pop-up [Manual] prompt will appear.

zPress the <Up or Down Arrow> to select [Automatic] then press <ENT>.

zThe current measured correction value is displayed (see below).

zPress <ENT> again to install this correction value which will now appear next to the [HF] menu cell.

NOTE: The value shown in the [Automatic] pop-up prompt can not be changed and is for user information only.

Siemens Dual Path 4SS10G

Siemens Dual Path 4SS10G

fx (drive)	29
N (burst length)	5
Ltn in		5.316
Vf max CU		Adjustment
Vs max m/s		>Automatic
Vs min m/s		1355.00
Samples/Cycle	29
HF	>-0.000

fx (drive)

N (burst length) Ltn in

Vf max CU Vs max m/s Vs min m/s Samples/Cycle

HF

29

5

5.316

>Automatic

=0.026

1355.00

29

>-0.026

Site Setup Data

Site Setup Data

zIf you decide not to use the [Automatic] selection, press any key other than <ENT> to abort the operation.

2-71