Section 2 | ||
|
|
|
2.11.1 MAIN DIAGNOSTICS SCREEN
This is the Main Diagnostics Data screen. It provides menus that show Flow, Application, Liquid and Site Setup information. The Test Facilities menu provides test/control functions to optimize operation, analyze application conditions and to recover system operation.
Siemens | Dual Path | ABC |
| ||
|
| ||||
|
|
|
|
|
|
| Path Select |
| All |
|
|
| Path Enable |
| N/A |
|
|
| Flow Data |
|
|
|
|
| Application Info |
|
|
|
|
| Liquid Data |
|
|
|
|
| Site Setup Data |
|
|
|
|
| Test Facilities |
| No |
|
|
| Print Site Setup |
| 13.24.01 |
| |
| Date Site Created | 04.18.01 |
| ||
|
|
|
|
|
|
Diagnostic Data
MAIN DIAGNOSTIC MENU DESCRIPTION
Flow Data | This menu shows flow rate, total & alarm data; adjustable flow limits. |
Application Info | This menu shows current meter operating status. |
Liquid Data | This menu shows current Reynolds # and RTD temperature readings |
| (if this system includes optional RTD Temperature measurement cap- |
| ability). |
Site Setup Data | This menu shows current transducer setup data and signal status. |
Test Facilities | This menu provides system test and recovery routines. |
Print Site Setup | This Menu cell allows you to send an ASCII dump of the current Site Data to a |
| |
Date Site Created | This menu cell shows date and time when the current site was created. |
2.11.2 FLOW DATA MENU
This menu provides a “live” display of all
| Siemens | Quad Path | SITE1 |
|
| Current Flow Rate and Units |
| ||
|
|
|
|
|
| Flow GAL/MIN |
|
| |
| Flow Vel F/S |
|
| |
| Total KGAL |
| 0.0000 |
|
| Vs m/s |
| 1273.21 |
|
| Signal mV |
| 44 |
|
| Valc % |
| 57 |
|
| Vaer % |
| 0 |
|
| Alarm Status |
|
| |
| AnCal GAL/MIN |
| 0.0000 |
|
| HiFlow GAL/MIN | 1576.8 |
| |
| LoFlow GAL/MIN |
|
Flow Data
NOTE: Menu shows English units (i.e., gallons).