Siemens SITRANS FUS1010 NEMA-4X/ IP 65 manual Pipe Configuration Menu Structure

Section 2 1010NFM-3J

2.3.4 PIPE CONFIGURATION

The [Pipe Configuration] menu cell in the Application Data menu presents a list of descriptions of piping configurations that could affect the flow profile characteristics (such as “Single Elbow”). Examine the option list. Selecting a piping configuration that closely approximates conditions at or near your mount- ing location allows the flow computer to compensate for the effect of upstream piping on flow profile. The number of diameters between the upstream configurations and the transducer installation can be numerically entered via the [Anomaly Diams] menu cell.

To select a Piping Configuration:

To access the option list press

To highlight the desired piping configuration press

To register selection press ENT

The default pipe configuration (Fully Developed) wll cause the flowmeter to use the conventional Rey- nolds Compensation Table when compensating for liquid flow profile behavior.

Use this menu cell to enter the number of pipe diameters between the upstream configuration and the transducer installation.

	Siemens		Dual Path	[1]	Path 1
	Disignate Pipe Shape Near Transducers
		Liquid Class		Water 20C/68F
		UniMass Table		Create/Edit Table
		Temperature Range		-40F to 250F
		Pipe Configuration		Fully Developed
		Anomaly Diams		1 Elbow
				Dbl Elbow +
				Dbl Elbow -
				Valve
				Expander
				Reducer
				Norm Entry
				Header Inlet
				Intrusions
Application Data

Use this menu cell to select the pipe configuration that most accurately represents the upstream pipe condition.

Pipe Configuration Menu Structure

Application Data	Pipe Configuration	Fully Developed*
	(Change to Upstream	1 Elbow
	Piping)	Dbl Elbow +
		Dbl Elbow -
		Valve
		Expander
		Reducer
		Norm Entry
		Header Inlet
		Intrusions
	Anomaly Diams	xxxx (numeric entry)
* Default

2-19