Siemens SITRANS FUS1010 NEMA-4X/ IP 65 manual HOW to CREATE/NAME a Site Setup

Section 2 1010NFM-3J

2.1.3 HOW TO CREATE/NAME A SITE SETUP

Use this command to create a new Site Setup. This is the first action required for an original installa- tion. Create/Name Site inserts system defaults in all the appropriate menu cells. You can edit these defaults as necessary to suit your needs.

You do not have to provide a site name in order to create a new Site Setup. You can create a site simply by pressing the <Right Arrow> to access the menu cell entry field and then pressing <ENT>. This creates a “nameless” Site Setup. However, if you intend to use the meter’s multi-site storage facility, you must enter a unique site name for each site setup you want to retain in site storage memory.

To Create and Name a new Site Setup:

To access the first character position press

To select a character press then to highlight to next character position. To select the second character press

Repeat this process to select all the characters (8 max.) you want to use to identify the new Site Setup.

To create the new Site Setup press ENT

NOTE: If you decide to use numbers in the site name, you can type these characters directly from the keypad.

2.1.4 HOW TO ENABLE/DISABLE SITE SECURITY

With Site Security enabled, the meter will require a password before it allows any activity that could interrupt or affect system operation. You can still access the Installation Menu. However, Site Security limits access to the viewing of parameters only. In other words, you will still be able to review site data, but you will not be able to make any changes.

Activate Site Security with care. Once activated, the only way to deactivate it is via the Site Security [Off] command. However, the cursor will not move to the Site Security option list until you enter the correct password. Therefore, it is essential that you never forget or misplace the password. The only way to deactivate Site Security without knowing the password is to return the unit to Siemens. How- ever, the process the factory uses to remove Site Security will eliminate any existing Site Data as well. The flowmeter will allow a <F4> Reset Sequence when Security is active, however, it also contains a Menu Enable switch that allows you to inhibit this function (see drawing 1010N-7).

CAUTION: MAKE CERTAIN THAT YOU RETAIN A COPY OF THE PASSWORD IN A SE- CURE LOCATION.

To activate Site Security:
To access [Site Security] option list press
To scroll the option list to [On] press	then ENT . [Enter Code?] appears at
the top of the display screen.
	2-4