Siemens SITRANS FUS1010 NEMA-4X/ IP 65 manual Stripchart Clear, Datalogger Setup Menu

Section 2 1010NFM-3J

2.8.4 STRIPCHART CLEAR

Use this menu cell to clear the stripchart. Selecting [Yes] erases all current stripchart data.

To erase the Stripchart plot:

To access the [Stripchart Clear] option list press

Move the cursor to [Yes] by pressing

To clear the current Stripchart plot press ENT

2.9THE DATALOGGER SETUP MENU

This menu becomes available after picking Meter Type and Measurement Channel.

The integral Datalogger records data for eventual display on Graphics Screen, or for connection to an RS-232 compatible external device (printer, computer, network, etc.). Use Datalogger Setup to select data items and real-time events for datalogger reports. You can also set the logging interval, operating mode and screen format. The Datalogger Setup menu allows you to choose time interval-based data categories or event-based status alarms, and to specify the interval between data reports.

View Datalogger reports on the display screen or transmit them via the RS-232 Serial Port to external printers and computers. Note that a single-channel meter uses a compression algorithm to maximize data storage. This disables back scrolling of datalogger reports.

Use this menu cell to pick a destination for Datalogger reports.

Use this menu cell to select items for Datalogger reports.

Use this menu cell to select real-time Datalogger triggers.

Siemens	Dual Path	Path 1
Select datalogger destination
Datalogger Mode		Off
Datalogger Data		None
Log Time Interval		1 Min.
Data Logger Events		None
Display Datalogger		Off
Datalogger Setup

Use this menu cell to select a logging interval.

Use this menu cell to send Datalogger reports to selected destination and pick up a line wrap mode.

2-52