Section 1 | ||
|
|
|
1.7.1ACCESSING AND LEAVING THE MENU
Upon first turning the meter on you see a Siemens graphic. This means that there is no active site setup currently stored in memory. Note that this screen identifies the software version of the meter on the upper
ver. 3.01.00
Software Version (x.xx.xx)
Make sure the keypad enable switch is in the correct position then press the <MENU> key to select the menu. The first time you access the Installation Menu, you can leave it only by saving a site or by turning the meter off. After installing and activating a site, use the <MENU> key to toggle between a graphic display screen and the last accessed menu location.
| Siemens | 2 Channel [1] Channel 1 |
| ||
| Select Meter Type |
|
|
| |
|
|
|
|
|
|
| Meter Type |
| >Dual Channel Flow |
| |
| Meter Facilities |
| Dual Beam Flow |
| |
| Using the Menu |
| Ch 1 + 2 Flow |
| |
|
|
|
| Ch 1 - 2 Flow |
|
|
|
|
|
|
|
Liquid Class
Top menu screen for
| Siemens | Site | [1] |
|
| |
| Select Meter Type |
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| Meter Type | Single Channel |
|
| |
|
| Meter Facilities |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Top menu screen for
When you press the <MENU> key, the cursor arrives at the first level of the installation menu. Refer to the sample screens above. The left screen is from a
1.7.2 HOW TO ENTER DATA
The
zAnother series of menu cells (may become left column items when selected).
zAn item from a scrollable option list (e.g., a class of liquids).
zA numeric entry (e.g., a pipe outer diameter).
zAn alphanumeric string (e.g., a site name).