Efficient Networks S120 manual Over pos velocity override, Torquered torque reduction

Communication PROFIBUS DP/PROFINET IO 10.1 Communications according to PROFIdrive

Over (pos velocity override)

This process data defines the percentage for the velocity override.

Normalization: 4000 hex (16384 dec) = 100 %

Range of values: 0 ... 7FFF hex

Values outside this range are interpreted as 0%.

TORQUERED (torque reduction) )

This setpoint can be used to reduce the torque limit currently active on the drive.

When you use manufacturer-specific PROFIdrive telegrams with the TORQUERED control word, the signal flow is automatically interconnected up to the point where the torque limit is scaled.









0205(' >@

HJE\

0BOLPLWB				S	6FDOLQJ
S
	S			
	S!		+H[
S	S[			S
>@		S		
				WR
0BOLPLWB				S	6FDOLQJ
S	S			
	S!		+H[
S				S
>@	S[	S		
				WR

MT_STW CU_STW A_DIGITAL

Figure 10-10 TORQUERED setpoint

TORQUERED specifies the percentage by which the torque limit is to be reduced. This value is converted internally to the amount by which the torque is to be reduced and normalized via p1544.

This process data is part of the central process data.

Drive Functions	363
Function Manual, (FH1), 07/2007 Edition, 6SL3097-2AB00-0BP4