Efficient Networks S120 manual Appendix Availability of SW functions, HW component

Appendix

A.2 Availability of SW functions

A.2 Availability of SW functions

Table A-3		New functions FW 2.2
No.		SW function	Servo	Vector	HW component
1	Technology controller		x	x
2	2 command data sets		-	x
3	Extended brake control		x	x
4	Automatic restart for Vector and Smart Line Modules 5/10 kW		-	x
5	The ability to mix servo and vector V/f modes on one CU		x	x
6	Regulated VDC link up to 480 V input voltage can be parameterized for		x	x
	Active Line Modules
7	Smart Mode for Active Line Modules booksize format		x	x
8	Extended setpoint channel can be activated		x	-
9	Evaluation, linear measuring systems		x	-
10	Synchronous motors 1FT6/1FK6/1FK7 with DRIVE-CLiQ resolver		x	-
Table A-4		New functions FW 2.3
No.		SW function	Servo	Vector	HW component
1	Motor data set changeover (8 motor data sets)		x	x
2	Buffer for faults/alarms		x	x
3	Rotor/pole position identification		x	x
4	Booting with partial topology, parking axis/encoder, de-		x	x
	activating/activating components
5	Friction characteristic with 10 points along the characteristic,		x	x
	automatic characteristic plot
6	Utilization display		x	x
7	Evaluation of distance-coded zero marks for higher-level controls		x	-
8	Hanging/suspended axes/electronic weight equalization for higher-		x	-
	level controls
9	SIMATIC S7 OPs can be directly coupled		x	x
10	PROFIBUS NAMUR standard telegrams		-	x
11	Parallel circuit configuration		-	x	For chassis drive units
12	Edge modulation		x	x	For chassis drive units
13	Servo control type		x	-	also chassis drive
					units
14	Terminal Module TM15 (DI/DO functionality)		x	x
15	1FN1, 1FN3 linear motors		x	-
16	1FW6 torque motors		x	-
17	1FE1 synchronous built-in motors		x	-
18	2SP1 synchronous spindles		x	-
19	1FU8 SIMOSYN Motors		x	-
20	1FS6 explosion-protected motors		x	-

536	Drive Functions
	Function Manual, (FH1), 07/2007 Edition, 6SL3097-2AB00-0BP4