Efficient Networks S120 manual Modular machine concept, Example of a sub-topology, Basic functions

		Basic functions
		6.3 Modular machine concept
Size	Scaling parameter	Default at initial commissioning
Reference temperature	100% = 100°C	-
Reference electrical angle	100 % = 90°	-

Overview of important parameters (refer to the List Manual)

●p0340 Automatic calculation of motor/control parameters

●p0573 Disable automatic calculation of reference values

●p2000 Reference speed reference frequency

●p2001 Reference voltage

●p2002 Reference current

●p2003 Reference torque

●r2004 Reference power

●p2005 Reference angle

●p2007 Reference acceleration

6.3Modular machine concept

Description

The modular machine concept is based on a maximum target topology created offline in STARTER. The maximum design of a particular machine type is referred to as the maximum configuration in which all the machine components that may be used are pre-configured in the target topology. Sections of the maximum configuration can be removed by deactivating/removing drive objects (p0105 = 2).

If a component fails, the sub-topology can also be used to allow a machine to continue running until the spare part is available. In this case, however, no BICO sources must be interconnected from this drive object to other drive objects.

Example of a sub-topology

The starting point is a machine created offline in STARTER for which "Drive 1" has not yet been implemented.

●Drive object "Drive 1" must be removed from the target topology via p0105 = 2 in offline mode.

●The DRIVE-CLiQ cable is reconnected from the Control Unit directly to "Drive 2".

●Download the project by choosing "Load to drive object".

●Copy from RAM to ROM.

Drive Functions	183
Function Manual, (FH1), 07/2007 Edition, 6SL3097-2AB00-0BP4