Efficient Networks S120 manual Examples for a data set assignment, Copying a command data set

Basic information about the drive system 12.2 Data sets

p0186[16] = p0186[17] = ... = p0186[23] p0186[24] = p0186[25] = ... = p0186[31]

If this rule is not observed, alarm A07514 is output. If you need a precise representation of the data set structure of the 611U, 32 drive data sets and 4 motor data sets must be configured.

Examples for a data set assignment

Table 12-2 Example, data set assignment
DDS	Motor	Encoder 1	Encoder 2	Encoder 3
	(p0186)	(p0187)	(p0188)	(p0189)
DDS 0	MDS 0	EDS 0	EDS 1	EDS 2
DDS 1	MDS 0	EDS 0	EDS 3	-
DDS 2	MDS 0	EDS 0	EDS 4	EDS 5
DDS 3	MDS 1	EDS 6	-	-

Copying a command data set

Set parameter p0809 as follows:

1.p0809[0] = Number of the command data set to be copied (source)

2.p0809[1] = Number of the command data to which the data is to be copied (target)

3.p0809[2] = 1

Start copying.

Copying is finished when p0809[2] = 0.

Note

In STARTER, you can copy the command data sets (Drive -> Configuration -> "Command data sets" tab page).

You can select the displayed command data set in the relevant STARTER screens.

Copying a drive data set

Set parameter p0819 as follows:

1.p0819[0] = Number of the drive data set to be copied (source)

2.p0819[1] = Number of the drive data set to which the data is to be copied (target)

3.p0819[2] = 1

Start copying.

Copying is finished when p0819[2] = 0.

474	Drive Functions
	Function Manual, (FH1), 07/2007 Edition, 6SL3097-2AB00-0BP4