Honeywell UDC2500 manual Viewing Times, Operation

Monitoring and Operating the Controller

Viewing Times

The times are viewed on the lower display as follows:

TIME REMAINING will show as a decreasing Hrs:Min value (HH:MM) or Min:Sec value (MM:SS) plus a counterclockwise rotating clock face.

ELAPSED TIME	will show as an increasing Hrs:Min value(HH:MM) or Min:Sec
	value (MM:SS) plus a clockwise rotating clock face.

Operation

When the Timer is enabled (RUN/HOLD key or ALARM 2), it has exclusive control of Alarm 1 relay.

At “TIME-OUT:

•Alarm 1 is active

•The clock character has stopped moving

•The Time display shows either 00:00 or the time-out period depending on the configuration selection

•The Timer is ready to be reset

At “RESET”:

•Alarm 1 relay is inactive

•The time display shows the time-out period

•The time-out period can be changed at this time using the orkeys.

•The Timer is ready to be activated

4/07 UDC2500 Universal Digital Controller Product Manual 103