Monitoring and Operating the Controller
4 Monitoring and Operating the Controller
4.1 Overview
Introduction
This section gives you all the information necessary to help you monitor and operate your controller including an Operator Interface overview, how to lockout changes to the controller, entering a security code, and monitoring the displays.
What's in this section?
The following topics are covered in this section.
| TOPIC | See Page |
4.1 | Overview | 89 |
|
|
|
4.2 | Operator Interface | 90 |
4.3 | Entering A Security Code | 90 |
4.4 | Lockout Feature | 91 |
4.5 | Monitoring The Controller | 93 |
4.6 | Single Display Functionality | 97 |
4.7 | Start Up Procedure for Operation | 96 |
4.8 | Control Modes | 100 |
4.9 | Setpoints | 101 |
4.10 | Timer | 102 |
4.11 | Accutune | 104 |
4.12 | Fuzzy Overshoot Suppression | 110 |
4.13 | Using Two Sets Of Tuning Constants | 110 |
4.14 | Alarm Setpoints | 112 |
4.15 | Three Position Step Control Algorithm | 113 |
4.16 | Setting A Failsafe Output Value For Restart After A Power Loss | 114 |
|
|
|
4.17 | Setting Failsafe Mode | 115 |
|
|
|
4.18 | Setpoint Rate/Ramp/Program Overview | 115 |
|
|
|
4.20 | Setpoint Rate | 117 |
|
|
|
4.19 | Setpoint Ramp | 116 |
|
|
|
4.21 | Setpoint Ramp/Soak Programming | 118 |
|
|
|
4.22 | P.I.E. Tool Maintenance Screens | 125 |
|
|
|
4.23 | Configuring your Ethernet Connection | 131 |
|
|
|
4/07 | UDC2500 Universal Digital Controller Product Manual | 89 |
