Honeywell UDC2500 manual Controller Status 00B4 180

Modbus Read, Write and Override Parameters plus Exception Codes

Parameter	Register		Data	Access		Data Range or
Description	Address		Type			Enumerated Selection
	Hex	Decimal
Controller Status	00B4	180	INT	R/W		0 = Last Setpoint and Mode
at Program End					1 = Manual, Failsafe Output
Reset SP Program	00B3	179	INT	R/W		0 = Disable
(ToBEGIN)						1 = Via Keypad
PV Hotstart	00E2	226	INT	R/W		0 = Disabled
						1 = Enabled
Segment #1 Ramp	0039	057	FP	R/W		99.59 (0-99 Hrs:0-59 Min)
Time						or
						0 to 999 (Degrees/Minute)
Segment #2 Soak	003A	058	FP	R/W		Within Setpoint Limits
Setpoint Value
Segment #2 Soak	003B	059	FP	R/W		99.59 (0-99 Hrs:0-59 Min)
Time
Segment #3 Ramp	003C	060	FP	R/W		99.59 (0-99 Hrs:0-59 Min)
Time						or
						0 to 999 (Degrees/Minute)
Segment #4 Soak	003D	061	FP	R/W		Within Setpoint Limits
Setpoint Value
Segment #4 Soak	003E	062	FP	R/W		99.59 (0-99 Hrs:0-59 Min)
Time
Segment #5 Ramp	003F	063	FP	R/W		99.59 (0-99 Hrs:0-59 Min)
Time						or
						0 to 999 (Degrees/Minute)
Segment #6 Soak	0040	064	FP	R/W		Within Setpoint Limits
Setpoint Value
Segment #6 Soak	0041	065	FP	R/W		99.59 (0-99 Hrs:0-59 Min)
Time
Segment #7 Ramp	0042	066	FP	R/W		99.59 (0-99 Hrs:0-59 Min)
Time						or
						0 to 999 (Degrees/Minute)
Segment #8 Soak	0043	067	FP	R/W		Within Setpoint Limits
Setpoint Value

4/07 UDC2500 Universal Digital Controller Product Manual 199