Honeywell UDC2500 manual Display Set Up Group, Decmal, 1201, Decimal Point LOCATION-This, 1202

Configuration

3.15 Display Set Up Group

Introduction

This group includes selections for Decimal place, Units of temperature, Language and Power frequency.

Function Prompts

Table 3-16 DISPLY Group (Numeric Code 1200) Function Prompts

Function Prompt		Selection or Range of Setting			Parameter
Lower Display		Upper Display			Definition
English	Numeric	English	Numeric
	Code		Code
DECMAL	1201	NONE		DECIMAL POINT LOCATION—This
		ONE		selection determines where the decimal point
		TWO		appears in the display.
				NONE—No Decimal Place—fixed, no auto-
				ranging 8888
				ONE—1 decimal place 888.8
				TWO—2 decimal places 88.88
					Auto-ranging will occur for
				ATTENTION
				selections of one or two decimal places. For
				example, should the instrument be
				configured for two decimal places and the
				PV exceeds 99.99, then the display will
				change to a single decimal place so that
				values of 100.0 and above can be shown.
UNITS	1202			TEMPERATURE UNITS—This selection will
				affect the indication and operation.
		F	0	DEG F—Degrees Fahrenheit – Degrees F
				Annunciator lighted
		C	1	DEG C—Degrees Centigrade – Degrees C
				Annunciator lighted
		NONE	2	NONE—No temperature annunciators
				lighted. Upper and Lower Displays will show
				temperature in Degrees Fahrenheit when
				inputs are configured for Thermocouple or
				RTD types.

82 UDC2500 Universal Digital Controller Product Manual 4/07