Honeywell UDC2500 manual = Rpm

Modbus Read, Write and Override Parameters plus Exception Codes

Parameter	Register		Data	Access		Data Range or
Description	Address		Type			Enumerated Selection
	Hex	Decimal
High Output	000E	014	FP	R/W	–5 to 105% of output
Limit
Low Output	000F	015	FP	R/W	–5 to 105% of output
Limit
Output Deadband	0012	018	FP	R/W	–5 to +25.0%
for Time Duplex
Output Deadband	0014	020	FP	R/W	0.5 to 5.0%
for TPSC
Output	0013	019	FP	R/W	0.0 to 100.0% of PV
Hysteresis
Failsafe Mode	00D5	213	INT	R/W	0	= Latching
					1	= Non latching
Failsafe Output	0028	040	FP	R/W	0 to 100%
Level
TPSC Power-up	00B7	183	INT	R/W	0	= Last
Output					1	= Failsafe
TPSC Failsafe	00B8	184	INT	R/W	0	= Motor goes to closed
Output						position (0%)
					1	= Motor goes to open
						position (100%)
Proportional	0094	148	INT	R/W	0	= Gain
Band Units					1	= Proportional band
Reset Units	0095	149	INT	R/W	0	= Minutes
					1	= RPM
PV High Range	0036	054	FP	R	PV High Limit
PV Low Range	0037	055	FP	R	PV Low Limit

210 UDC2500 Universal Digital Controller Product Manual 4/07