
Configuration
3 Configuration
3.1 Overview
Introduction
Configuration is a dedicated operation where you use straightforward keystroke sequences to select and establish (configure) pertinent control data best suited for your application.
To assist you in the configuration process, there are prompts that appear in the upper and lower displays. These prompts let you know what group of configuration data (Set Up prompts) you are working with and also, the specific parameters (Function prompts) associated with each group.
Table
What’s in this section?
The following topics are covered in this section.
Table 3-1 Configuration Topics
| TOPIC | See Page |
3.1 | Overview | 32 |
3.2 | Configuration Prompt Hierarchy | 33 |
3.3 | Configuration Procedure | 34 |
3.4 | Tuning Set Up Group | 35 |
3.5 | SP Ramp Set Up Group | 38 |
3.6 | Accutune Set Up Group | 43 |
3.7 | Algorithm Set Up Group | 46 |
3.8 | Output Set Up Group | 51 |
3.9 | Input 1 Set Up Group | 55 |
3.10 | Input 2 Set Up Group | 59 |
3.11 | Control Set Up Group | 61 |
3.12 | Options Set Up Group | 67 |
3.13 | Communications Set Up Group | 73 |
3.14 | Alarms Set Up Group | 76 |
3.15 | Display Set Up Group | 82 |
3.16 | P.I.E. Tool Ethernet and Email Configuration Screens | 84 |
3.17 | Configuration Record Sheet | 87 |
32 | UDC2500 Universal Digital Controller Product Manual | 4/07 |