1002 IPv6 PIM Commands
Example
console#show ipv6 pim bsr-router candidate
BSR Address...................... 2001:0db8:0:badc::1
BSR Priority.............................. 0
BSR Hash Mask Length...................... 32
C-BSR Advertisement Interval (secs)....... 60
Next Bootstrap message (hh:mm:ss)......... 00:00:02
If no configured/elected BSR’s exist on the router, the following message is
displayed:
No BSR’s exist/learned on this router.
show ipv6 pim interface
Use the show ipv6 pim interface command to display the PIM interface
status parameters. If the interface number is not specified, this command
displays the status parameters of all the PIM-enabled interfaces.
Syntax
show ipv6 pim interface [ vlan
vlan-id
]
Parameter Description
Default Configuration
There is no default configuration for this command.
Next Bootstrap
Message
Remaining time until a BSR message is sent
Next Candidate RP
Advertisement
Time remaining until the next RP advertisement is sent.
Parameter Description
vlan-id A valid VLAN ID for which multicast routing has been enabled.
Field Description
2CSPC4.XCT-SWUM2XX1.book Page 1002 Monday, October 3, 2011 11:05 AM