TACACS+ Commands 765
IP address Port Timeout Priority
--------------- ----- ------- --------
10.254.24.162 49 Global 0
tacacs-server host
Use the tacacs-server host command in Global Configuration mode to
configure a TACACS+ server. This command enters into the TACACS+
configuration mode. To delete the specified hostname or IP address, use the
no form of this command.
Syntax
tacacs-server host {
ip-address
|
hostname
}
no tacacs-server host {
ip-address
|
hostname
}
•
ip-address

—

The IP address of the TACACS+ server.
•

hostname —

The hostname of the TACACS+ server. (Range: 1-255
characters).
Default Configuration
No TACACS+ host is specified.
Command Mode
Global Configuration mode
User Guidelines
To specify multiple hosts, multiple tacacs-server host commands can be used.
TACACS servers are keyed by the host name, therefore it is advisable to use
unique host names.
Example
The following example specifies a TACACS+ host.
2CSPC4.XCT-SWUM2XX1.book Page 765 Monday, October 3, 2011 11:05 AM