1486 Serviceability Tracing Packet Commands
NOTE: Debug commands are not persistent across resets.
debug arp
Use the debug arp command to enable tracing of ARP packets. Use the “no”
form of this command to disable tracing of ARP packets.
Syntax
debug arp
no debug arp
Default Configuration
ARP packet tracing is disabled by default.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no usage guidelines for this command.
Example
console#debug arp
debug console debug ip pimsm
packet
debug lacp debug vrrp
debug dot1x debug ip vrrp debug
mldsnooping
show debugging
debug
igmpsnooping
debug ipv6 dhcp debug ospf
debug ip acl debug ipv6 mcache debug ospfv3
debug ip dvmrp debug ipv6 mld debug ping
2CSPC4.XCT-SWUM2XX1.book Page 1486 Monday, October 3, 2011 11:05 AM