608 Multicast VLAN Registration Commands
Commands in this Chapter
This chapter explains the following commands:
mvr
Use the mvr command in Global Config and Interface Config modes to
enable MVR. Use the no form of this command to disable MVR.
Syntax
mvr
no mvr
Parameter Description
This command does not require a parameter description.
Default Configuration
The default value is Disabled.
Command Mode
Global Config, Interface Config
User Guidelines
MVR can only be configured on physical interfaces.
mvr mvr type
mvr group mvr vlan group
mvr mode show mvr
mvr querytime show mvr members
mvr vlan show mvr interface
mvr immediate show mvr traffic
2CSPC4.XCT-SWUM2XX1.book Page 608 Monday, October 3, 2011 11:05 AM