1180 OSPFv3 Commands
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example configures the area 1 NSSA ABR so that learned
external routes will not be redistributed to the NSSA.
console(config)#ipv6 router ospf
console(config-rtr)#area 1 nssa no-redistribute
area nssa no-summary
Use the area nssa no-summary command in Router OSPFv3 Configuration
mode to configure the NSSA so that summary LSAs are not advertised into
the NSSA. Use the no form of the command to remove the configuration.
Syntax
area
areaid
nssa no-summary
no area
area-id
nssa no-summary
•
areaid
— Valid OSPF area identifier.
Default Configuration
This command has no default configuration.
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
2CSPC4.XCT-SWUM2XX1.book Page 1180 Monday, October 3, 2011 11:05 AM