OSPFv3 Commands 1217
Command Mode
User EXEC mode.
User Guidelines
This command has no user guidelines.
Example
console#show ipv6 ospf abr
Type Router Id Cost Area ID Next Hop Next Hop
Intf
---- -------- ---- -------- ----------------------- -----
INTRA 3.3.3.3 10 0.0.0.1 FE80::211:88FF:FE2A:3CB3 vlan11
INTRA 4.4.4.4 10 0.0.0.1 FE80::210:18FF:FE82:8E1 vlan12
show ipv6 ospf area
Use the show ipv6 ospf area command in Privileged EXEC mode to display
information about the area.
Syntax
show ipv6 ospf area
areaid
•
areaid
— Identifier for the OSPF area being displayed.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
2CSPC4.XCT-SWUM2XX1.book Page 1217 Monday, October 3, 2011 11:05 AM