312 Auto-VoIP Commands
show switchport voice
Use the show switchport voice command to show the status of Auto-VoIP on
an interface or all interfaces.
Syntax
show switchport voice [gigabitethernet
unit/slot/port
|
port-channel
port-
channel-number
| tengigabitethernet
unit/slot/port
]
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Examples
The following example shows command output when a port is specified:
console#show switchport voice
Interface Auto VoIP Mode Traffic Class
--------- -------------- -------------
Gi1/0/1 Disabled 6
Gi1/0/2 Disabled 6
Gi1/0/3 Disabled 6
Gi1/0/4 Disabled 6
Gi1/0/5 Disabled 6
Gi1/0/6 Disabled 6
Gi1/0/7 Disabled 6
2CSPC4.XCT-SWUM2XX1.book Page 312 Monday, October 3, 2011 11:05 AM