108 Command Groups
Spanning Tree
radius-server source-ip Specifies the source IP address used for
communication with RADIUS servers.
GC
radius-server timeout Sets the interval for which a switch waits for a
server host to reply.
GC
retransmit Specifies the number of times the software
searches the list of RADIUS server hosts before
stopping the search.
R
show aaa servers Displays the list of configured RADIUS servers
and the values configured for the global
parameters of the RADIUS client.
UE or
PE
show radius-servers Displays the RADIUS server settings. PE
show radius-servers
statistics
Shows the statistics for an authentication or
accounting server.
PE
source-ip Specifies the source IP address to be used for
communication with RADIUS servers.
R
timeout Sets the timeout value in seconds for the
designated radius server.
R
usage Specifies the usage type of the server. R
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
Command Description Modea
clear spanning-tree
detected-protocols
Restarts the protocol migration process on all
interfaces or on the specified interface.
PE
exit (mst) Exits the MST configuration mod e and applies
configuration changes.
MC
instance (mst) Maps VLANs to an MST instance. MC
name (mst) Defines the MST configuration name. MC
revision (mst) Defines the configuration revision number. MC
show spanning-tree Displays spanning tree configuration. PE
Command Description Modea
2CSPC4.XCT-SWUM2XX1.book Page 108 Monday, October 3, 2011 11:05 AM