1172 OSPF Commands
Syntax Description
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes.
User Guidelines
This command has no user guidelines.
Example
The following example displays the OSPF Virtual Interface information in
the system.
console#show ipv6 ospf virtual-link brief
Hello Dead Retransmit Transit
Area ID Neighbor Interval Interval Interval Delay
------- -------- -------- -------- ---------- -------
0.0.0.2 5.5.5.5 10 40 5 1
timers spf
Use the timers spf command in Router OSPF Configuration mode to
configure the SPF delay and hold time. Use the no form of the command to
reset the numbers to the default value.
Syntax
timers spf
delay-time hold-time
no timers spf
•
delay-time
— SPF delay time. (Range: 0–65535 seconds)
•
hold-time
— SPF hold time. (Range: 0–65535 seconds)
2CSPC4.XCT-SWUM2XX1.book Page 1172 Monday, October 3, 2011 11:05 AM