408 Ethernet Configuration Commands
Admin Local Link ------ ------ ------ ------ ------
Advertisement yes yes yes yes no
show interfaces configuration
Use the show interfaces configuration command in User EXEC mode to
display the configuration for all configured interfaces.
Syntax
show interfaces configuration [{gigabitethernet
unit/slot/port
|
port-channel
port-channel-number
| tengigabitethernet
unit/slot/port
}]
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no use guidelines.
Example
The following example displays the configuration for all configured
interfaces:
console>show interfaces configuration
Port Type Duplex Speed Neg Admin
State
----- ------------------------------ ------ ------- ---- -----
1/0/1 Gigabit - Level Full 100 Auto Up
1/0/2 Gigabit - Level N/A Unknown Auto Up
1/0/3 Gigabit - Level N/A Unknown Auto Up
1/0/4 Gigabit - Level N/A Unknown Auto Up
1/0/5 Gigabit - Level N/A Unknown Auto Up
2CSPC4.XCT-SWUM2XX1.book Page 408 Monday, October 3, 2011 11:05 AM