1196 OSPFv3 Commands
overflow state. The router never holds more than the external LSDB limit
non-default AS-external- LSAs in it database. The external LSDB limit
MUST be set identically in all routers attached to the OSP F backbone and/or
any regular OSPF area.
Syntax
external-lsdb-limit
limit
no external-lsdb-limit
•
limit
— External LSDB limit for OSPF (Range: -1-2147483647)
Default Configuration
-1 is the default value for
limit
.
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example sets the external LSDB limit at 100 for OSPF.
console(config)#ipv6 router ospf
console(config-rtr)#external-lsdb-limit 100
ipv6 ospf
Use the ipv6 ospf command in Interface Configuration mode to enable
OSPF on a router interface or loopback interface.
Syntax
ipv6 ospf
no ipv6 ospf
2CSPC4.XCT-SWUM2XX1.book Page 1196 Monday, October 3, 2011 11:05 AM