874 DHCP Server and Relay Agent Commands
hardware-address
Use the hardware-address command in DHCP Pool Configuration mode to
specify the MAC address of a client to be manually assigned an address. Use
the no form of the command to remove the MAC address assignment.
Syntax
hardware-address
hardware-address
no hardware-address
Parameter Description
Default Configuration
There are no default MAC address manual bindings.
Command Mode
DHCP Pool Configuration mode
User Guidelines
Use the show ip dhcp pool command to display pool configuration
parameters. It may be necessary to use the no host command prior to
executing the no hardware-address command.
Example
console(config-dhcp-pool)#hardware-address
00:23:12:43:23:54
console(config-dhcp-pool)#host 192.168.21.131 32
Parameter Description
hardware-address MAC address of the client. Either the XXXX.XXXX.XXXX or
XX:XX:XX:XX:XX:XX form of MAC address may be used where
XX is a hexadecimal digit.
2CSPC4.XCT-SWUM2XX1.book Page 874 Monday, October 3, 2011 11:05 AM