812 Voice VLAN Commands
Example
console(config-if-Gi1/0/1)#voice vlan 1
console(config-if-Gi1/0/1)#voice vlan dot1p 1
console(config-if-Gi1/0/1)#voice vlan none
console(config-if-Gi1/0/1)#voice vlan untagged
voice vlan data priority
This command is to either trust or not trust (untrust) the data traffic arriving
on the voice VLAN port.
Syntax
voice vlan data priority { trust | untrust }
•
trust—
Trust the dot1p priority or DSCP values contained in packets
arriving on the voice vlan port.
•
untrust—
Do not trust the dot1p priority or DSCP valu es contained in
packets arriving on the voice vlan port.
Command Mode
Interface Configuration
Default Value
trust
Example
console(config-if-1/0/1)#voice vlan data priority untrust
console(config-if-1/0/1)#voice vlan data priority trust
show voice vlan
show voice vlan [interface {gigabitethernet
unit/slot/port
|
tengigabitethernet
unit/slot/port
| all}]
2CSPC4.XCT-SWUM2XX1.book Page 812 Monday, October 3, 2011 11:05 AM