Router Discovery Protocol Commands 1237
User Guidelines
This command has no user guidelines.
Example
The following example enables router discovery on the selected interface.
console(config)#interface vlan 15
console(config-if-vlan15)#ip irdp
ip irdp address
Use the ip irdp address command in Interface Configuration mode to
configure the address that the interface uses to send the router discovery
advertisements. Use the no form of the command to return the address to the
default.
Syntax
ip irdp address
ip-address
no ip irdp address
•
ip-address
— IP address for router discovery advertisements. (Range:
224.0.0.1
[
all-hosts IP multicast address
]
or 255.255.255.255
[
limited
broadcast address
]
)
Default Configuration
IP address 224.0.0.1 is the default configuration.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
This command has no user guidelines. This command is deprecated in favor
of the ip irdp multicast command. If you issue this command, the
configuration will show the ip irdp multicast command instead.
2CSPC4.XCT-SWUM2XX1.book Page 1237 Monday, October 3, 2011 11:05 AM