Port Channel Commands 629
interface port-channel
Use the interface port-channel command in Global Configuration mode to
configure a port-channel type and enter port-channel configuration mode.
Syntax
interface
port-channel
port-channel-number
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enters the context of port-channel 1.
console(config)# interface port-channel 1
console(config-if-po1)#
interface range port-channel
Use the interface range port-channel command in Global Configuration
mode to execute a command on multiple port channels at the same time.
Syntax
interface range port-channel {

port-channel-range

| all}
•

port-channel-range

— List of port-channels to configure. Separate non-
consecutive port-channels with a comma and no spaces. A hyphen
designates a range of port-channels. (Range: valid port-channel)
•
all
— All the channel-ports.
2CSPC4.XCT-SWUM2XX1.book Page 629 Monday, October 3, 2011 11:05 AM