Multicast Commands 1075
ip pim dense
Use the ip pim dense command in Global Configuration mode to
administratively configure PIM dense mode for IP multicast routing. Use th e
no form of this command to disable PIM dense mode. This command
replaces the ip pimsm command.
Syntax
ip pim dense
no ip pim dense
Default Configuration
PIM is not enabled by default.
Command Mode
Global Configuration mode
User Guidelines
Only one of sparse or dense mode can be configured on a router.
Example
console(config)#ip pim dense
ip pim dr-priority
The ip pim dr-priority command in Interface (VLAN) Configuration mode
to administratively configure the advertised designated router (DR) priority
value. Use the no form of this command to return the configuration to the
default.
Syntax
ip pim dr-priority
priority
no ip pim dr-priority
•
priority
— The administratively configured priority (Range:
0–2147483647).
2CSPC4.XCT-SWUM2XX1.book Page 1075 Monday, October 3, 2011 11:05 AM