Auto-Install Commands 1299
boot host autosave
Use the boot host autosave command in Global Configuration mode to
enable automatically saving the downloaded configuration on the switch. Use
the no form of this command to disable automatically saving the downloaded
configuration on the switch.
Syntax
boot host autosave
no boot host autosave
Parameter Description
This command does not require a parameter description.
Default Configuration
The default value is disabled.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines
Example
console#
console#configure
console(config)#boot host auto-save
console(config)#no boot host auto-save
boot host dhcp
Use the boot host dhcp command in Global Configuration mode to enable
Auto-Install and Auto Configuration on the switch. When a switch boots
with a saved startup configuration that includes this command, the Auto-
2CSPC4.XCT-SWUM2XX1.book Page 1299 Monday, October 3, 2011 11:05 AM