576 Link Dependency Commands
Examples
console(config-linkDep-group-1)#depends-on
gigabitethernet 1/0/10
console(config-linkDep-group-1)#depends-on port-
channel 6
show link-dependency
Use the show link-dependency command to show the link dependencies
configured for a particular group. If no group is specified, then all the
configured link-dependency groups are displayed.
Syntax
show link-dependency [
group GroupId
] [detail]
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
No specific guidelines
Example
The following command shows link dependencies for all groups.
Parameter Description
GroupID
Link dependency group identifier. (Range: Valid Group Id,
1–16)
detail Show detailed information about the state of members and the
dependent ports.
2CSPC4.XCT-SWUM2XX1.book Page 576 Monday, October 3, 2011 11:05 AM