652 QoS Commands
console(config)#
classofservice dot1p-mapping
Use the classofservice dot1p-mapping command in Global Configuration
mode to map an 802.1p priority to an internal traffic class. In Interface
Configuration mode, the mappi ng is applied only to packets received on that
interface. Use the no form of the command to remove mapping between an
802.1p priority and an internal traffic class.
Syntax
classofservice dot1p-mapping

802.1ppriority

trafficclass

no classofservice dot1p-mapping
•

802.1ppriority

— Specifies the user priority mapped to the specified traffic
class for this switch. (Range: 0–7)
•

trafficclass

— Specifies the traffic class for this switch. (Range: 0–6)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration or Interface Configuration (Ethernet, Port-channel)
mode
User Guidelines
None
Example
The following example configures mapping for user priority 1 and traffic class
2.
console(config)#classofservice dot1p-mapping 1 2
2CSPC4.XCT-SWUM2XX1.book Page 652 Monday, October 3, 2011 11:05 AM