152 Command Groups
RMON
power inline priority Configures the port priority level for the
delivery of power to an attached device.
IC
(Ethernet)
power inline priority
enable
Use this command along with the power
inline management command for power
management.
GC
power inline reset Use to reset the port. IC
power inline usage-
threshold
Configures the system power usage
threshold level at which lower priority
ports are disconnected.
GC
clear power inline statistics Clears the PoE statistics. PE
show power inline Reports current PoE configuration and
status.
PE
show power inline
firmware-version
Displays the version of the PoE controller
firmware present on the switch file system.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
Command Description Modea
rmon alarm Configures alarm conditions. GC
rmon collection history Enables a Remote Monitoring (RMON) MIB
history statistics group on an interface.
IC
rmon event Configures an RMON event. GC
show rmon alarm Displays alarm configurations. UE
show rmon alarms Displays the alarms summary table. UE
and
PE
show rmon collection
history
Displays
the requested group of statistics.
UE
show rmon events Displays the RMON event table. UE
show rmon history Displays RMON Ethernet Statistics history. UE
show rmon log Displays the RMON logging table. UE
show rmon statistics Displays RMON Ethernet Statistics. UE
2CSPC4.XCT-SWUM2XX1.book Page 152 Monday, October 3, 2011 11:05 AM