Using the CLI 177
console>
The default host name is Console unless it has been changed using the
hostname command in the Global Configuration mode.
Privileged EXEC Mode
Because many of the privileged commands set operating parameters,
privileged access is password-protected to prevent unauthorized use. The
password is not displayed on the screen and is case sensitive.
Privileged users enter into the Privileged EXEC mode from User EXEC
mode, where the following prompt is displayed.
console#
Global Configuration Mode
Global Configuration commands apply to features that affect the system as a
whole, rather than just a specific interface. The Privileged EXEC mode
command configure is used to enter the Global Configuration mode.
console(config)#
The following are the Global Configuration modes:
•
SNMP v3 Host Configuration
— Configures the parameters for the
SNMP v3 server host.
•
SNMP Community Configuration
— Configures the parameters for the
SNMP server community.
Interface and Other Specific Configuration Modes
Interface configuration modes are used to modify specific interface
operations. The following are the Interface Configuration and other specific
configuration modes:
•
MST
— The Global Configuration mode command spanning-tree mst
configuration is used to enter into the Multiple Spanning Tree
configuration mode.
•
Line Interface
— Contains commands to configure the management
connections. These include commands such as line speed and timeout
settings. The Global Configuration mode command
line
is used to enter
the Line Interface mode.
2CSPC4.XCT-SWUM2XX1.book Page 177 Monday, October 3, 2011 11:05 AM