QoS Commands 683
Source Layer 4 Port 80(http/www)
show classofservice dot1p-mapping
Use the show classofservice dot1p-mapping command in Privileged EXEC
mode to display the current Dot1p (802.1p) priority mapping to internal
traffic classes for a specific interfa ce.
Syntax
show classofservice dot1p-mapping [{gigabitethernet
unit/slot/port
|
port-
channel
port-channel-number
| tengigabitethernet
unit/slot/port
}]
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
If the interface is specified, the 802.1p mapping table of the interface is
displayed. If omitted, the most recent global configuration settings are
displayed.
Example
The following example displays the dot1p traffic class mapping and user
priorities.
console#show classofservice dot1p-mapping
User Priority Traffic Class
------------- ---------------
01
11
26
34
2CSPC4.XCT-SWUM2XX1.book Page 683 Monday, October 3, 2011 11:05 AM