System Management Commands 1633
Default Configuration
This command has no default mode.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the mode to Stack Global Config.
console(config)#stack
console(config-stack)#
stack-port
Use the stack-port command in Stack Configuration mode to configure Stack
ports as either Stacking ports or as Ethernet ports. This command is used to
configure CX-4 ports to be either stacking or Ethernet ports . By default , CX-4
ports are Ethernet ports.
Syntax
stack-port tengigabitethernet
unit/slot/port
{ethernet | stack}
Default Configuration
By default, these ports are configured as stacking ports.
Command Mode
Stack Configuration mode
2CSPC4.XCT-SWUM2XX1.book Page 1633 Monday, October 3, 2011 11:05 AM