IP Routing Commands 983
Default Gateway is not configured
S 10.0.0.0/8 [1/0] via 1.2.3.5
show ip route preferences
Use the show ip route preferences command in Privileged EXEC mode
displays detailed information about the route preferences. Route preferences
are used in determining the best route. Lower router preference values are
preferred over higher router preference values.
The user can configure a global default gateway using the ip default-gateway
command, creating a default route with a preference of 253. The show ip
route preferences command lists the new preference value. The show
command also displays the preference of default routes learned from a DHCP
server.
Syntax
show ip route preferences
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays IP route preferences.
console#show ip route preferences
2CSPC4.XCT-SWUM2XX1.book Page 983 Monday, October 3, 2011 11:05 AM