1272 Virtual Router Redundancy Protocol Commands
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
This command has no user guidelines.
Example
The following example sets the authorization details value for VRRP router
group 5 on VLAN 15.
console(config)#interface vlan 15
console(config-if-vlan15)#vrrp 2 authentication
simple test123
vrrp description
Use the vrrp description command in Interface Configuration mode to assign
a description to the Virtual Router Redundancy Protocol (VRRP) group. To
remove the description, use the no form of the command.
Syntax
vrrp group description
text
no vrrp group description
Syntax Description
Default Configuration
No description is present.
Command Mode
Interface Configuration (VLAN) mode.
Parameter Description
group The virtual router identifier. (Range: 1-255)
text Description for the virtual router group up to 80 characters.
2CSPC4.XCT-SWUM2XX1.book Page 1272 Monday, October 3, 2011 11:05 AM