Virtual Router Redundancy Protocol Commands 1277
•

level

— Priority value for the interface. (Range: 1-254)
Default Configuration
Priority has a default value of 100.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
This command has no user guidelines.
Example
The following example sets the priority value for the virtual router 5 on VLAN
15.
console(config-if-vlan15)#vrrp 5 priority 20
vrrp timers advertise
Use the vrrp timers advertise command in Interface Configuration mode to
set the frequency, in seconds, that an interface on the specified virtual router
sends a virtual router advertisement. Use the no form of the command to
return the advertisement frequency to the default value.
Syntax
vrrp
group
timers advertise
interval
no vrrp
group
timers advertise
interval
•

group

— The virtual router identifier. (Range: 1-255)
•
interval
— The frequency at which an interface on the specified virtual
router sends a virtual router advertisement. (Range: 1-255 seconds)
Default Configuration
Interval
has a default value of 1.
2CSPC4.XCT-SWUM2XX1.book Page 1277 Monday, October 3, 2011 11:05 AM